Need help?Do you have a question about the Neat Possum SensorMATe 3 and is the answer not in the manual?
Procedure for removing and installing batteries, including polarity and shock protector.
Details the function of each membrane button on the SensorMATe device.
Steps for setting the date and time upon initial power-up of the device.
Visual guide to navigating the SensorMATe's settings menu structure.
Explains how to set the real-time clock, including DST compensation.
Details setting the date for accurate timekeeping and DST compensation.
Covers configuration options for operational modes, PIN protection, and defaults.
Configuring the RJ10/22 and RJ12 input sockets for different sensor types.
Specifies selection options for sensor types (NormOpen, NormClosed, Enuresis) for input sockets.
Defines monitoring periods (24hr, Day, Night, Day/Night) and event triggers.
Sets the delay before an alarm is raised for daytime occupancy monitoring.
Sets the dwell time for night-time occupancy monitoring.
Adjusts sensitivity to reduce false alarms from user movement like fidgeting.
Configures the sensitivity threshold for enuresis sensor events.
Sets the alarm type transmitted for sensor activation, aiding identification.
Defines the number of primary alarms before an upscale alarm is sent.
Sets the retransmission delay for alarm events.
Determines the number of 'Upscale alarms' to be transmitted.
Sets the repeat delay for up-scaled alarm transmissions.
Configures the hour for 'Day time' monitoring to begin.
Configures the minute for 'Day time' monitoring to begin.
Configures the hour for 'Night time' monitoring to begin.
Configures the minute for 'Night time' monitoring to begin.
Enables and configures ambient room temperature monitoring and alarm settings.
Settings for adjusting radio parameters, including single receiver acknowledgement.
Enables testing of inputs, transmissions, and component functionality.
Guidelines for cleaning the SensorMATe unit, avoiding liquids and extreme conditions.
Step-by-step guide to restoring the SensorMATe to its factory default configuration.
Recommendation to remove batteries during storage to prevent damage.
General| Brand | Neat |
|---|---|
| Model | Possum SensorMATe 3 |
| Category | Transmitter |
| Language | English |
To Next Page
