The Lift Spring and Forward Spring (i
Plate Flick Guard
12
Plate flick guard stops spoon from spilling food at edge of plate.
• The plate flick guard can be set for
use with two plates
• When using the smaller plate,
simply slide the slider into position
to engage with the shaped catch.
• Shaped catch engages with guard
bar as spoon is brought forward
towards the edge of plate
• Here the spoon cannot be lifted and
flick food
• The spoon is made to move back as
it is lifted missing the plate edge
Guard Bar
Shaped Catch
Slider
Different plates may require
adjustment of:
• The angle of the shaped catch
(loosen bracket screws, adjust
angle, retighten screws)
• The length of the shaped catch
(loosen locking screw inside the
shaped catch, rotate shaped
catch to length or shorten,
retighten locking screw)
Bracket Screws
• Once clear of the plate, the spoon
can be brought to your mouth
Shaped Catch
Guard Bar
Locking Screw
Shaped Catch
Guard Bar
Slider
To Next Page
Loading...