1
Plate Turner
(with one or
two spacers)
turn plate
without
lifting hand
Fitting adaptations
Baseboard modular components
• Screws are removed and replaced with longer screws to
fit different adaptations.
• Some holes are positioned to angle the extensions so
that spoon lines up with the edge of the plate
Fitting Adaptations
Raising Spacers
(one or two) inserted
between components
Baseboard
Extension
(fit either end)
for accessibility
Long Baseboard
keeps clamp away from knee
Clamp Replacement
• Different size clamps can be fitted:
Large, Standard and Compact.
• Clamps are held in by screws and
plastic washers underneath.
13
To Next Page