-15- Making and Receiving Calls
Making a call from
Incoming calls list
From the home screen, press the Left key. Alternatively press the Options
menu key, Call logs then Incoming calls.
Select the phone number on the list.
Press the Start key to make a call from the Incoming calls list.
Making a call from
Outgoing calls list
From the home screen, press the Start key. Alternatively press the
Options menu key, Call logs then Outgoing calls.
Select the phone number on the list.
Press the Start key to make a call from the Outgoing calls list.
Making a call from Missed
calls list
From the home screen, press the Right key. Alternatively press the
Options menu key, Call logs then Missed calls.
Select the phone number on the list.
Press the Start key to make a call from the Missed calls list.
Speed dial Enter a contact memory number from 2 to 99. Press Start key to call the
phone number registered for the memory number.
For the contact memory whose number is 2 to 9, you can also make a call
by pressing and holding the keypad of the memory number.
The memory number from 2 to 9 can be changed form the Speed dial
screen. To find the Speed dial screen, press the MENU key, select
Contacts, press the Options menu key and select Speed dial.
Note : Pressing 1 and Start key, or pressing and holding 1 will make a
call to the voicemail centre.
Note : If more than one phone number is registered for a memory
number, the first number is used to make a call.
Pause Dial Input the phone number, then press and hold # to insert a pause
(displayed as p). Input the numbers to call, inserting pauses where
necessary. Press the Start key to dial the input numbers. When the other
party answers the call, press the SK1 (Send) key to dial the numbers after
the pause. Keep pressing the SK1 key until all the required numbers are
dialled.
Entering the sub-address
of a phone number
After inputting the phone number, press the key and input the sub-
address number. You can specify one sub-address (office extension
number, etc.) for a phone number.
Operation Procedure
To Next Page
Loading...
