To Next PageTo Next PageWhat to do if I cannot make or answer calls on my NEC E616V?
If you cannot make or answer calls on your NEC Cell Phone, first make sure the screen displays at least one bar of signal strength. Avoid areas with electrical or radio interference, and obstructions like bridges, parking garages, or tall buildings. Also, check if the Call Barring feature is enabled in the security menu and ensure your SIM card is properly installed and working.
What to do if my NEC E616V Cell Phone screen shows 'Emergency calls only'?
If your NEC Cell Phone displays 'Emergency calls only', turn off your handset and ensure that you have inserted a valid SIM.
How to increase volume on NEC Cell Phone?
If you cannot hear others on your NEC Cell Phone, press the volume key up while on a call.
What to do if my NEC E616V asks for a security code?
If the screen of your NEC Cell Phone says 'Please enter your four digit security code', enter the manufacturer’s security code number (default is 0000). If this fails, call 3 Customer Services on 0870 7330 333.
What to do if my NEC E616V does not respond when I press the power button?
If you pressed the power button on your NEC Cell Phone and nothing happened, press and hold the On/Off button for two seconds until the screen appears and you hear an audible alert. If nothing happens, check that the battery is charged.
Why does my NEC Cell Phone make an alternating high/low tone when I try to call?
If you tried to place a call on your NEC Cell Phone and heard an alternating high/low tone, it means your call did not reach the network. Wait until your handset’s screen shows either or at the top of your screen before making a call.
What to do if my NEC E616V Cell Phone was stolen or lost?
If your NEC Cell Phone was stolen or lost, report it to the police and to 3 Customer Services on 0870 7330 333.
What to do if my NEC Cell Phone screen says 'SIM Blocked'?
If the screen of your NEC Cell Phone says 'SIM Blocked', call 3 Customer Services 0870 7330 333 to obtain the PIN unblocking (PUK) code.
Why is my NEC E616V Cell Phone not ringing?
If your NEC Cell Phone does not ring, and you see in the screen, the ringer is turned off. Also, the ringer may be set to Silent even though your handset is set to a ring alert profile.
General| Brand | NEC |
|---|---|
| Model | E616V |
| Category | Cell Phone |
| Language | English |
Instructions for inserting the Subscriber Identity Module (SIM) into your handset.
Guide on how to install the battery correctly into the handset.
Familiarizes users with the basic features and layout of the NEC e616 handset.
Explains the different components of the handset's start screen and icons.
Details the function of each key and navigation element on the handset.
Step-by-step instructions for powering the handset on and off.
Instructions on how to initiate voice and video calls by entering a number.
Guide on how to answer or reject incoming voice and video calls.
Steps to make calls to stored contacts from the handset's address book.
How to add new contact details, including numbers and addresses.
Steps for setting up voicemail, recording greetings, and accessing messages.
Instructions for composing and sending SMS messages.
Configuration steps for setting up email accounts on the handset.
Instructions for changing the default PIN code for SIM security.
Information on how to make emergency calls in different regions.
Provides solutions for common problems encountered with the handset.
