NEC E616V - Installing the SIM

2 Remove the battery.
1 Pull out the release lock at
the top of the battery.
1.2
Get ready to go
e616V
Get ready to go
1.1
e616V
Installing the SIM
Your SIM (Subscriber Identity
Module) contains your phone
number, service details and
contacts, and must be inserted
into your handset.
If the SIM is removed, your
handset becomes unusable
until a valid one is inserted.
The holder for your SIM is
located underneath the battery.
Always disconnect the charger
and other accessories from
your handset before inserting
and removing your SIM.
Your
3 SIM may only be used
in handsets which are enabled
for
3 services. Any attempt to
use the SIM in other handsets
may result in serious damage
to the handset and may
prevent you from being able
to use it, including making
emergency calls. In these
instances, we are not
responsible for any such
damage or usage problems.
5 Replace the battery by
placing the ridge at the
side into the side of your
handset. Push the battery
down into position and
snap it into place.
3 Insert your SIM into the
holder, ensuring the gold
plate is facing down and the
card is positioned as shown.
SIM
4 Slide the SIM securely
into its SIM holder before
replacing the battery.