Emergency Services and Safety Precautions PL-6
• To use memory card with other "Memory Stick" compliant devices (e.g. a PC card slot), be sure to set the memory card
into the adaptor.
• Do not use a Memory Stick with standard size in this device.
• Make sure to insert the memory card in the right direction otherwise, the device may be damaged.
• The memory card cannot be used for recording copyright-protected data, such as music, because it is not equipped with
MagicGate™.
• Even if this memory card is used with "Memory Stick PRO™" compliant products, the data read/write speed of this
medium will not change.
• Always insert the memory card with the memory erasure prevention switch unlocked.
• When you set the memory card erasure prevention switch to "LOCK", data cannot be recorded, edited or erased. Use
this lock function when using the card with other devices, such as a PC.
• Use a sharp object, such as a ballpoint pen, to move the erasure prevention switch.
• Do not remove the memory card while it is reading or writing data.
• Data may be damaged if:
- You remove the memory card or turn off the unit while it is reading or writing data.
- You use the memory card in a location subject to the effects of static electricity or electric noise.
• We recommend that you make a backup copy of important data that you record on the memory card. To make a backup,
copy the data to a PC hard disk, etc.
• Do not write forcefully on the memo area.
• Carry and store the memory card in its case.
• Do not touch the connector of the memory card with anything, including your finger or metallic objects.
• Do not strike, bend or drop the memory card.
• Do not disassemble or modify the memory card.
• Do not allow the memory card to get wet.
• Do not store the memory card in a location that is:
- Extremely hot, such as in a car parked in the sun.
- Under direct sunlight.
- Very humid or subject to corrosive substances.
• Data read/write speed may vary depending on the combination of the memory card and "Memory Stick Duo" compliant
product you use.
• Do not insert the memory card directly into standard "Memory Stick" compliant products.
• Insert the memory card fully in to the adaptor until it clicks into place. Otherwise, it will not operate correctly.
To Next Page
Loading...
