8
Point the top of the remote control toward the LCD monitor's re-
mote sensor during button operation.
Use the remote control within a distance of about 7 m/23 ft. from
the front of the LCD monitor's remote control sensor and at a hori-
zontal and vertical angle of within 30° within a distance of about
3 m/10 ft.
* Other than to install the batteries, do not open the remote.
*
Do not allow water or other liquid to splash onto the remote
control. If the remote control gets wet, wipe it dry immediately.
* Avoid exposure to heat and steam.
Operating Range for the Remote Control
The remote control system may not function when direct sunlight
or strong illumination strikes the remote control sensor of the LCD
monitor, or when there is an object in the path.
Parts Name and Functions –continued
Caution
Handling the remote control
30
o
30
o
To Next Page
Loading...
Need help?
General