NEC M350X - Page 94


5. Using On-Screen Menu
4URNING/NTHE0ROJECTOR"Y!PPLYING#OMPUTER3IGNAL;!54/0/7%2/.#/-0=
7HENTHEPROJECTORISIN3TANDBYMODEAPPLYINGACOMPUTERSIGNALFROMACOMPUTERCONNECTEDTOTHE#/-054%2
).INPUTWILLPOWERONTHEPROJECTORANDSIMULTANEOUSLYPROJECTTHECOMPUTERSIMAGE
4HISFUNCTIONALITYELIMINATESTHENEEDTOALWAYSUSETHE0/7%2BUTTONONTHEREMOTECONTROLORTHEPROJECTORCABINET
TOPOWERONTHEPROJECTOR
4OUSETHISFUNCTIONlRSTCONNECTACOMPUTERTOTHEPROJECTORANDTHEPROJECTORTOANACTIVE!#INPUT
./4%
s $ISCONNECTINGACOMPUTERSIGNALFROMTHECOMPUTERWILLNOTPOWEROFFTHEPROJECTOR7ERECOMMENDUSINGTHISFUNCTIONINCOM
BINATIONOFTHE!54/0/7%2/&&FUNCTION
s 4HISFUNCTIONWILLNOTBEAVAILABLEUNDERTHEFOLLOWINGCONDITIONS
 WHENACOMPONENTSIGNALISAPPLIEDTOTHE#/-054%2).CONNECTOR
 WHENA3YNCON'REEN2'"SIGNALORCOMPOSITESYNCSIGNALISAPPLIED
s 4OENABLETHE!54/0/7%2/.#/-0AFTERTURNINGOFFTHEPROJECTORWAITSECONDSANDINPUTACOMPUTERSIGNAL
 )FACOMPUTERSIGNALISSTILLPRESENTWHENTHEPROJECTORISTURNEDOFFTHE!54/0/7%2/.#/-0WILLNOTWORKANDTHEPROJECTOR
REMAINSINSTANDBYMODE
%NABLING0OWER-ANAGEMENT;!54/0/7%2/&&=
7HENTHISOPTIONISSELECTEDYOUCANENABLETHEPROJECTORTOAUTOMATICALLYTURNOFFATTHESELECTEDTIMEMINMIN
MINMINIFTHEREISNOSIGNALRECEIVEDBYANYINPUTORIFNOOPERATIONISPERFORMED
3ELECTING$EFAULT3OURCE;$%&!5,43/52#%3%,%#4=
9OUCANSETTHEPROJECTORTODEFAULTTOANYONEOFITSINPUTSEACHTIMETHEPROJECTORISTURNEDON
LAST ...................... Sets the projector to default to the previous or last active input each time the projector is turned on.
AUTO ..................... Searches for an active source in order of COMPUTER1 m COMPUTER2 m HDMI m VIDEO m S-VIDEO m
VIEWER m USB DISPLAY m COMPUTER1 and displays the first found source.
COMPUTER1 ......... Displays the computer signal from the COMPUTER 1 IN connector every time the projector is turned on.
COMPUTER2 ......... Displays the computer signal from the COMPUTER 2 IN connector every time the projector is turned on.
HDMI ..................... Displays the digital source from the HDMI IN connector every time the projector is turned on.
VIDEO .................... Displays the Video source from the VIDEO IN connector every time the projector is turned on.
S-VIDEO ................ Displays the Video source from the S-VIDEO IN connector every time the projector is turned on.
VIEWER ................. Displays slides or plays back movie files from the USB memory device every time the projector is turned
on.
NETWORK ............. Displays a signal from LAN port (RJ-45) or the USB Wireless LAN Unit.
USB DISPLAY ........ Displays the computer signal from the USB (PC) port every time the projector is turned on.