English-3
EN
English
WARNING
1
UNPLUG
THE POWER
CORD
Unplug the power cord if the product malfunctions.
Should the product emit smoke or strange odors or sounds, or if the
product has been dropped or the cabinet broken, turn off the product’s
power, then unplug the power cord from the power outlet. Failure to
do so could not only lead to re or electric shock, it could also result in
burn impairment. Contact your dealer for repairs.
Never try to repair the product on your own. Doing so is dangerous.
2
Do not open or remove the product’s cabinet.
Do not disassemble the product.
There are high voltage areas in the product. Opening or removing
product covers and modifying the product may expose you to electric
shock, re, or other risks.
Refer all servicing to qualied service personnel.
3
Do not use the product if it has structural damage.
If you notice any structural damage such as cracks or unnatural
wobbling, please refer servicing to qualied service personnel. If
the product is used in this condition, the product may fall or cause
personal injury.
4
Handle the power cord with care. Damaging the cord could lead to re
or electric shock.
• Do not place heavy objects on the cord.
• Do not place the cord under the product.
• Do not cover the cord with a rug, etc.
• Do not scratch or modify the cord.
• Do not bend, twist or pull the cord with excessive force.
• Do not apply heat to the cord.
Should the cord be damaged (exposed core wires, broken wires, etc.),
ask your dealer to replace it.
5
Do not touch the power plug if you hear thunder. Doing so could result
in electric shock.
6
Please use the power cord provided with this product in accordance
with the power cord table.
If a power cord is not supplied with this product, please contact NEC.
For all other cases, please use the power cord with the plug style
that matches the power socket where the product is located. The
compatible power cord corresponds to the AC voltage of the power
outlet and has been approved by, and complies with, the safety
standards in the country of purchase.
7
For proper installation it is strongly recommended to use a trained
service person.
Failure to follow the standard installation procedures could result in
damage to the product or injury to the user or installer.
To Next Page
Loading...
Need help?
General