NEC MultiSync EA241F User Manual

English-13
English
Controls
OSD(On-ScreenDisplay)controlkeysonthefrontofthemonitorfunction
as follows:
1 Ambient Light Sensor
Human Sensor
Detects the level of ambient lighting and the presence of a user, allowing the monitor to
make adjustments to various settings resulting in a more comfortable viewing experience.
Do not cover this sensor.
2 INPUT/SELECT Enters sub menus in the OSD menu when the OSD menu is displayed on the screen.
Shows a switching menu for the input source when the OSD menu is not displayed on the
screen.
You can directly change to the [L/B] (LOW BLUE LIGHT) mode by touching this key for
3 seconds or more when the OSD menu is not open.*
1
3 MENU/EXIT Opens the OSD menu. Closes the OSD sub menus and main menu. You can restore the
saved settings in the [CUSTOMIZE SETTING] by touching this key for 3 seconds or more
when the OSD menu is not open.
4 LEFT/RIGHT/
UP/DOWN*
2
When the OSD menu is displayed on the screen, navigates through the OSD menu.
When the OSD menu is not displayed on the screen, touch one of the following keys to open
the menu for the function indicated.*
1
[ ] key: [BRIGHTNESS]
[ ] key: [VOLUME]
5 ECO/RESET When the OSD menu is displayed on the screen, this key sends a reset command for the
OSD settings.
When the OSD menu is not displayed on the screen, this key switches the [ECO MODE]
status. You can set a mode from [OFF], [1] and [2].*
1
Activates the [AUTO ADJUST] function by touching this key for 3 seconds or more when the
OSD menu is not open (analog input only)*
1
.
6 Power Turns the monitor on and off.
7 Power LED Indicates that the power is on or off.
*
1
When the [HOT KEY] function is [OFF], this function is disabled.
*
2
Depending on the [OSD ROTATION] setting, [LEFT], [RIGHT], [UP] and [DOWN] key guides are displayed at
the [ ], [ ], [ ], [ ] keys differently (See page 18).
ECO TOOLS
BRIGHTNESS
Adjusts the overall image and background screen brightness.
If [ECO MODE] is set to [1] or [2], a bar for [CARBON FOOTPRINT] will appear.
CONTRAST
Adjusts the overall image and background screen brightness by input signal level.
NOTE: When [L/B] is selected in the [Color Control System], [CONTRAST] is disabled.

NEC MultiSync EA241F Specifications

General

Brand	NEC
Model	MultiSync EA241F
Category	Monitor
Language	English