English
English-9
Flexible Arm Installation
This LCD monitor is designed for use with a flexible arm. To mount the monitor to a flexible arm:
1. Follow the instructions on how Remove Monitor Stand for Mounting to remove the stand.
2. Using 4 screws attach the arm to the monitor (Figure F.1).
NOTE: 1. The LCD monitor should only be used with an approved arm (e.g. GS mark). To meet the safety requirements,
the monitor must be mounted to an arm, which ensures the necessary stability under consideration of the
weight of the monitor.
2. The mounting stand must be able to sustain at least 9.6 kg (EX201W)/12 kg (EX231W/EX231Wp) and be
UL certified.
Thickness of Bracket (Arm)
2.0~3.2 mm
Weight of LCD assembly: 2.4 kg MAX (EX201W)
3.0 Kg MAX (EX231W/EX231Wp)
100 mm
Figure F.1
4 Screws (M4)
(Max Depth: 9.5 mm)
100 mm
12 mm
4 x 12 mm with lock
washer and flat washer
To Next Page
Loading...
