To Next Page

To Previous Page

English

English-5

Figure E.1

Vacation

Switch

Power Button

Figure C.3

Figure D.1

Figure D.2

Figure C.4

7. Hold all cables firmly and place the cable cover onto the stand (Figure D.1). To remove the cable cover, lift the cover off as

shown in Figure D.2.

8. Connect one end of the power cord to the AC inlet on the back of the monitor and the other end to the power outlet.

NOTE: Please refer to Caution section of this manual for proper selection of AC power cord.

9. The Vacation Switch on the left side of the monitor must be turned on. Turn on the monitor with the front power button

(Figure E.1) and the computer.

NOTE: The Vacation Switch is a true on/off switch. If this switch is on the OFF position, the monitor cannot be turned on

using the front button. DO NOT switch on/off repeatedly.

10. No-touch auto adjust automatically adjusts the monitor to optimal settings upon initial setup for most timings. For further

adjustments, use the following OSM controls:

• Auto Contrast (Analog input only)

• Auto Adjust (Analog input only)

Refer to the Controls section of this User’s Manual for a full description of these OSM controls.

NOTE: If you have any problems, please refer to the Troubleshooting section of this User’s Manual.

Questions and Answers:

Need help?

Do you have a question about the NEC MultiSync LCD2090UXi and is the answer not in the manual?

NEC MultiSync LCD2090UXi Specifications

General

Pixel pitch	0.255 mm
Response time	16 ms
Display diagonal	20.1 \
Display resolution	1600 x 1200 pixels
Vertical scan range	50 - 85 Hz
Horizontal scan range	31.5 - 91.1 kHz
Viewable size diagonal	510 mm
Contrast ratio (typical)	700:1
Display number of colors	16.78 million colors
Display brightness (typical)	280 cd/m²
Audio system	MultiSync Soundbar 90
Power requirements	100-120 V/220-240 V; 0.68 A/0.29 A
Certification	CE; TCO 03; TÜV Ergonomics; TÜV GS; C-tick; GEEA/Energy Label; FCC Class B; PCT/Gost; UL/C-UL or CSA; CCC; ISO 13406-2; MPR II/ MPR III; PCBC/B-mark; PSB; RoHS
Product color	Silver
Market positioning	-
Cable lock slot	Yes
Tilt angle range	-5 - 30 °
Height adjustment	150 mm
Cable lock slot type	Kensington
Panel mounting interface	100 x 100 mm
Power consumption (typical)	50 W
Power consumption (PowerSave)	1 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	30 - 80 %
Sustainability certificates	ENERGY STAR