NEC MultiSync UN552S - User Manual

Video Wall Installation Guide
NEC Display Solutions
Guide
Settings and Adjustments for MultiSync® UN552S | UN552VS | UN552 | UN552V |
UN552A | UX552S | UX552 | UN492S | UN492VS | UN462A | UN462VA
A guide to trouble-free, efficient
video wall installation
This guide will assist you in setting up your video wall
quickly and correctly in order to benefit fully from the
specially designed video wall features. Please read the
instructions carefully and consider all the steps in order to
achieve the best results.
Attention: For unboxing and physical monitor handling,
please refer to the printed Installation Manual included in
each display carton box.
AUTO SETUP Principle
Any input signal up to UHD resolution can be distributed across the
video wall by using the Tile Matrix function. The UNxx2 displays provide
several “AUTO SETUP” functions for simple and fast video wall setup
and management. To enable these functions to operate correctly, it is
necessary for DisplayPort, HDMI and LAN cables to be daisy chained as
illustrated below.
Primary monitor - input/output mapping
For uncompromising visual results, no signal conversion is necessary.
Refer to the mapping table between input and output interfaces.
Depending on the required input source, use HDMI and/or DisplayPort
Daisy Chain cabling.
DisplayPort OUT
HDMI OUT
INPUT OUTPUT
DisplayPort
OPS SLOT2 (DisplayPort)
HDMI
DVI
OPS SLOT2 (HDMI)
Integrated Media Player
PRIMARY
MONITOR
ID: 1 ID: 2 ID: 3
ID: 6 ID: 5 ID: 4
ID: 7 ID: 8 ID: 9
DisplayPort
HDMI
OPS
Media Player
LAN
1
UNxx2/UXxx2 DAISY CHAIN: INPUT / OUTPUT MAPPING

NEC MultiSync UN552S Specifications

General

Pixel pitch	0.63 x 0.63 mm
Response time	8 ms
Display diagonal	55 \
Display brightness	700 cd/m²
Display technology	LED
Native aspect ratio	16:9
Vertical scan range	23 - 86 Hz
Horizontal scan range	26 - 134 kHz
Contrast ratio (typical)	1700:1
Display diagonal (metric)	138.78 cm
Active display area (W x H)	1209.63 x 680.34 mm
Operating hours (hours/days)	24/7
Power consumption (standby)	0.5 W
Power consumption (typical)	234 W
Maximum refresh rate	60 Hz
Annual energy consumption	341 kWh
Purpose	Universal
Orientation	Horizontal/Vertical
Product color	Black
Product design	Video wall
Placement supported	Indoor
Bezel width (bottom)	0.44 mm
Panel mounting interface	400 x 400 mm
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %
Certification	BSMI; CE; EAC; EMC B; FCC; PSB; RCM; REACH; RoHS; SASO; TÜV GS; TÜV S; UL/C-UL; VCCI
Sustainability certificates	RoHS
Cables included	AC, DisplayPort, HDMI
USB ports quantity	5
HDMI ports quantity	3
Compatible memory cards	MicroSD (TransFlash)
Ethernet LAN data rates	10, 100 Mbit/s
HDMI input ports quantity	2
Ethernet LAN (RJ-45) ports	1
Audio formats supported	AAC, MP3, WAV
Image formats supported	JPG, PNG
Video formats supported	FLV, H.264, MOV, MP4, MPG, WMV
Harmonized System (HS) code	85285210

Weight and Dimensions

Depth	98.6 mm
Width	1210.5 mm
Height	681.2 mm
Weight	25800 g

Summary

AUTO SETUP Principle

Primary Monitor Input;Output Mapping

Auto TileMatrix Setup

Additional PC-less Advanced Calibration

PC-less Display Self-Calibration

Self-calibration adjusts monitor settings using factory LUT and an MDSV Sensor 3.

PC-less White Copy Function

Copy settings from a reference display using self-calibration and an MDSV Sensor 3.

Display Wall Calibration High-End Adjustment

Corner Uniformity Correction

Uniformity Correction