To Next Page

To Previous Page

English-27

English

OVER SCAN

HDMI, DVD/HD, SCART, VIDEO1, VIDEO2,

S-VIDEO inputs only

Some video formats may require different scanning modes in order to best display the image. ON

Image size is larger than what can be displayed. The image edge will appear cropped.

Approximately 95% of the image will be shown on the screen.

OFF Image size stays within the display area. The whole image is displayed on the screen.

NOTE: When you use a computer with HDMI out, please set “OFF”.

OPTION SETTING You can set this setting when option board accessory is connected to the monitor.

Please contact your supplier for detailed information about Option board slot accessories.

OPTION POWER Allow the monitor to supply power to Option board slot during power save mode or standby

mode.

OFF

INTERNAL PC The function is available for slot 2 type PC.

OFF WARNING If OPTION POWER is OFF, a warning message appears when monitor power is turned off.

NOTE: Warning message does not appear when monitor power is turned off by OFF TIMER

setting or SCHEDULE setting.

AUTO OFF Monitor power is automatically “OFF” when connected PC is OFF or the monitor is in power save

mode.

START UP PC When ON is selected, connected PC start-up.

FORCE QUIT When ON is selected, it performs force quit PC.

120Hz

(not adjustable) -

MURA COMP

(not adjustable) -

RESET Resets the following settings within the ADVANCED OPTION menu back to factory setting:

INPUT DETECT (except the priority of input signals), INPUT CHANGE, TERMINAL SETTING,

DEINTERLACE, COLOR SYSTEM, OVER SCAN, START UP PC in OPTION SETTING and

FORCE QUIT in OPTION SETTING.

FACTORY RESET Resets OSD options back to factory settings EXCEPT FOR: PICTURE MODE, VOLUME,

SCHEDULE SETTINGS, DATE & TIME, ASPECT in PIP, SUB INPUT in PIP, LANGUAGE, LAN

SETTING, OSD ROTATION, CHANGE SECURITY PASSWORD and SECURITY.

Other manuals for NEC MultiSync V422

Questions and Answers:

Need help?

Do you have a question about the NEC MultiSync V422 and is the answer not in the manual?

General

Pixel pitch	0.48 x 0.48 mm
Response time	10 ms
Display diagonal	42 \
Display brightness	370 cd/m²
Vertical scan range	50 - 85 Hz
Horizontal scan range	31.5 - 91.1 kHz
Contrast ratio (dynamic)	-
Contrast ratio (typical)	1300:1
Display number of colors	16.78 million colors
Supported graphics resolutions	720 x 400, 832 x 624, 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 768 (WXGA), 1360 x 768 (WXGA), 1600 x 1200 (UXGA), 1920 x 1080 (HD 1080), 640 x 480 (VGA), 800 x 600 (SVGA)
3D	No
Separate H/V sync	Yes
Cable lock slot type	Kensington
USB 2.0 ports quantity	0
S-Video inputs quantity	1
Viewable size, vertical	523.3 mm
Viewable size, horizontal	930.2 mm
DVI-D ports quantity	2
Product color	Black
Product design	Digital signage flat panel
Bezel width (side)	44 mm
Bezel width (bottom)	43 mm
Panel mounting interface	300 x 300 mm
RMS rated power	10 W
Cables included	VGA
Remote control type	IR
Power consumption (standby)	2 W
Power consumption (typical)	155 W
Operating altitude	0 - 3000 m
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	5 - 40 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %
Package depth	206 mm
Package width	1142 mm
Package height	703 mm
Package weight	27000 g