NEC MultiSync V552

Other manuals for NEC MultiSync V552

Questions and Answers:

E
Eric BridgesAug 19, 2025
How to fix no picture on NEC MultiSync V552 Monitor?
- M
  Michele TurnerAug 19, 2025
  If your NEC monitor is not displaying a picture, ensure the signal cable is securely connected to both the display card and the computer. Also, confirm the display card is properly seated in its slot. Check that the main power switch on the monitor is in the ON position, as well as the front power switch and the computer power switch. Verify that a supported mode has been selected on the display card or system. Ensure compatibility between the monitor and display card, checking for recommended settings. Lastly, inspect the signal cable connector for any bent or pushed-in pins.
J
Jessica JacobsAug 21, 2025
Why is the LED on my NEC MultiSync V552 Monitor not lit?
- J
  Jennifer BrooksAug 21, 2025
  If the LED on your NEC monitor isn't lit, make sure the power switch is in the ON position and the power cord is properly connected. Check the main power switch on the back of the monitor. Ensure your computer isn't in a power-saving mode by touching the keyboard or mouse. Also, verify that the power indicator option in the OSD (On-Screen Display) is set to ON.
J
Jacob JonesAug 25, 2025
What to do if the power button does not respond on NEC MultiSync V552 Monitor?
- F
  fjonesAug 25, 2025
  If the power button on your NEC monitor is unresponsive, try unplugging the power cord from the AC outlet to turn off and reset the monitor. Also, check the main power switch on the back of the monitor to ensure it is in the correct position.
T
Timothy VaughnAug 26, 2025
Why is the image unstable on my NEC monitor?
- P
  Philip AlexanderAug 26, 2025
  If your NEC monitor displays an unstable, unfocused, or swimming image, ensure the signal cable is fully connected to the computer. Use the OSD (On-Screen Display) Image Adjust controls to focus and fine-tune the display. Check the compatibility and recommended signal timings between the monitor and your display card. If the text appears garbled, switch the video mode to non-interlace and use a 60Hz refresh rate.
C
Christine RobertsAug 28, 2025
How to properly size display image on NEC MultiSync V552?
- J
  Julie MurrayAug 28, 2025
  If the display image on your NEC monitor isn't sized properly, use the OSD Image Adjust controls to adjust the coarse adjustment. Also, make sure a supported mode has been selected on the display card or system being used.
A
Aaron GilesAug 30, 2025
Why is there no sound on my NEC MultiSync V552 Monitor?
- E
  Edward BrownAug 30, 2025
  If you are experiencing no sound from your NEC monitor, check that the audio cable is properly connected. Ensure that mute is not activated and the volume is not set to minimum. Verify if your computer supports an audio signal through DisplayPort. Check if SURROUND is ON, and inspect the Internal/External speaker switch.
J
Jordan WilsonSep 1, 2025
What to do if selected resolution is not displayed properly on NEC monitor?
- A
  Andre MartinezSep 1, 2025
  If the selected resolution is not displayed properly on your NEC monitor, use the OSD Display Mode to enter the Information menu and confirm that the appropriate resolution has been selected. If it is not, select the corresponding option.
M
Mr. Jason HillSep 3, 2025
Why is the remote control not available on my NEC MultiSync V552?
- R
  ronald03Sep 4, 2025
  If the remote control for your NEC monitor isn't working, check the batteries' status and ensure they are inserted correctly. Make sure the remote is pointed at the monitor's remote sensor, and check the Remote Control Mode status. The remote control system may not function when direct sunlight or strong illumination strikes the remote control sensor, or if there is an object in the path.
A
Andrea PhillipsSep 5, 2025
Why is the image of component signal greenish on my NEC monitor?
- J
  John Wagner MDSep 6, 2025
  If the image of a component signal on your NEC monitor appears greenish, check to see if the DVD/HD input connector is selected.
T
Tiffany BrownSep 8, 2025
Why is the red LED on my NEC MultiSync V552 Monitor blinking?
- J
  Jason KeySep 8, 2025
  If the RED LED on your NEC monitor is blinking, it means the monitor powered off because the internal temperature exceeded the normal operating range. After confirming the internal temperature has reduced to normal, power the display on again.

NEC MultiSync V552 Specifications

General

Panel life	- h
Pixel pitch	0.63 x 0.63 mm
Response time	8 ms
Display diagonal	55 \
Display brightness	430 cd/m²
Display technology	LCD
Native aspect ratio	16:9
Vertical scan range	50 - 85 Hz
Horizontal scan range	31.5 - 91.1 kHz
LED backlighting type	Edge-Lit LED
Supported video modes	1080p
Touchscreen technology	Infrared
Display number of colors	16.78 million colors
Active display area (W x H)	1209.6 x 680.4 mm
Orientation	Horizontal/Vertical
Product color	Black
Product design	Digital signage flat panel
Bezel width (top)	41.4 mm
Panel mounting interface	300 x 300 mm
Wi-Fi	-
DVI-D ports quantity	2
Cable lock slot type	Kensington
Power consumption (standby)	2 W
Power consumption (typical)	100 W
Package depth	250 mm
Package width	1430 mm
Package height	920 mm
Operating altitude	0 - 3000 m
Non-operating altitude	3000 - 12192 m
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	5 - 40 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %
RMS rated power	10 W
Cables included	AC, DVI