English-13
English
5. Switch on the power of all the attached
external equipment
When connected with a computer, switch on the power of
the computer first.
6. Operate the attached external
equipment
Display the signal from the desired input source.
7. Adjust the sound
Make volume adjustments when required.
8. Adjust the screen (See pages 19 and 20)
Make adjustments to the screen display position when
necessary.
9. Adjust the image (See page 19)
Make adjustments such as brightness or contrast when
required.
10. Recommended Adjustments
To reduce the risk of the “Image Persistence”, please adjust
the following items based on the application being used:
“POWER SAVE”, “SCREEN SAVER” (See page 21),
“SIDE BORDER COLOR” (See page 22), “DATE AND TIME”,
“SCHEDULE” (See page 20).
11. To prevent the main power switch from
being changed
To prevent use of the main power switch, please attach the
main switch cover, which is enclosed as an accessory.
NOTE: With the main power switch cover in place, the main
power switch cannot be turned off. Remove main
power switch cover in order to switch off the display.
Main switch cover
Screw (3 x 6) x 2
To Next Page
Loading...
Need help?
General