Operation
25
Video Doctor (Self-Diagnosis)
This feature informs you that there is a problem with your
DVD+VCR. These error messages will appear on the TV
screen.
1. Press i.
Press
11
or
22
to select .
Press ENTER/OK.
2. Press
33
or
44
to check a problem.
ANTENNA CONNECT
O PLEASE CHECK:
Connect the aerial into the jack securely.
HEAD STATUS
O PLEASE CLEAN:
Clean your video heads.
TAPE STATUS
O NOT RECORDABLE:
Insert a tape with its protection tab in place
NO. OF TIMER PROGRAMME
O 2
Shows the number of timer recording.
NEXT TIMER PROGRAMME
O PR-01 26 10:00~11:00 SP
Shows the current status of timer recording.
3. Press i to remove the menus from the TV screen.
1W Mode (Power save Mode)
Set 1W ON/OFF to ON to place your DVD+VCR into an
economic power save mode.
Nothing is displayed in the display window.
1 Press i.
The main menu will appear on the TV screen.
Press
F or G to select the 1W ON/OFF.
Press ENTER/OK.
2. Press
D or E to select the ON.
3 Press i.
Note:
Some function may not be operated in the 1W Mode.
• The 1W Mode is not available in the standby mode for
the timer recording.
To Next Page
Loading...