NEC NP-M311W User Manual

======================================================================
Control Commands for NEC Projector (Basic) Rev 4.28.11a
Copyright (C) NEC Display Solutions, Ltd. 2002-2011
----------------------------------------------------------------------
Updated on April 28, 2011
----------------------------------------------------------------------
This file contains information about NEC projector control commands.
Model Name
GT60 : GT5000/GT6000 Series
GT50 : GT1150/GT2150 Series
HT : HT1000/HT1100 Series
HT10 : HT410/HT510 Series
LT180 LT180
LT30 : LT25/LT30/LT35 Series
LT : LT220/LT240/LT240K/LT260/LT260K/LT245/LT265 Series
LT80 : LT280/LT380 Series
MT70 : MT860/MT1060/MT 1065/MT1075 Series
NP60 : NP40/NP50/NP60 Series
NP62 : NP41/NP61/NP62 Series
NP1000 : NP1000/NP2000 Series
NP3150 : NP1150/NP2150/NP3150/NP3151W Series
NP4000 : NP4000/NP4001 Series
NP905 : NP905/NP901W/VT800 Series
NP600 : NP300/NP400/NP500/NP500W /NP500WS/NP600/NP600S Series
VT : VT770 Series
VT70 : VT37/VT47/VT480/VT57/VT570/VT575/VT670/VT676 Series
VT80 : VT48/VT480/VT580 Series
VT90 : VT49/VT490/VT590/VT595/VT695 Series
VT700 : VT700
WT : WT600/WT610/WT615 Series
NP4100 : NP4100/NP4100W Series
NP3250 : NP1250/NP2250/NP3250/NP3250W Series
NP610 : NP310/NP410/NP410W /NP510/NP510W/NP510WS/NP610/NP610S Series
NP2200 : NP1200/NP2200 Series
NP216 : NP110/NP115/NP215/NP216 Series
NP64 : NP43/NP64 Series
M300 : M260X/M260W/M300X/M300W Series
P420 : P350X/P350W /P420X Series
U300 : U300X/U310W Series
V300 : V260/V260X/V200X Series

NEC NP-M311W Specifications

General

Lamp Life (Eco)	6000 hours
Display Technology	DLP
Lamp Life (Normal)	4000 hours
Throw Ratio	1.5 - 1.8:1
Zoom Ratio	1.2x
Video Compatibility	NTSC, PAL, SECAM, HDTV
Projection Size	30 to 300 inches
Noise Level (ECO)	28 dB
Resolution	1280 x 800
Input Terminals	HDMI, VGA, Composite
Keystone Correction	±30° (Vertical)

Summary

NEC Projector Control Overview

NEC Projector Connection Methods

Serial Connection for Projector Control

Utilizes the projector's serial port for command communication via a serial cable.

USB Connection for Projector Control

Uses the projector's USB port for command communication via a USB cable.

LAN Connection for Projector Control

Enables control via wired or wireless LAN cards or the projector's LAN port.

Projector Interface Conditions

Projector Communication Frame Structure

Projector Communication Frame Format

Describes the frame composition including header, data portion, and checksum.

NEC Projector Command List

Detailed Command Descriptions

Projector ID and Model Code Notations

Explains the significance of Projector ID and Model code inscriptions in commands.

RUNNING SENSE Command Example

Provides an example of the RUNNING SENSE command and its response.