Do you have a question about the NEC NP-V260 and is the answer not in the manual?
Native aspect ratio | 4:3 |
---|---|
Projection distance | 1.2 - 13 m |
Vertical scan range | 50 - 120 Hz |
Horizontal scan range | 15 - 100 kHz |
Projection technology | DLP |
Contrast ratio (typical) | 2000:1 |
Screen size compatibility | 33 - 300 \ |
Projector native resolution | SVGA (800x600) |
Keystone correction, vertical | -40 - 40 ° |
Focus | Manual |
Throw ratio | 1.95 - 2.15:1 |
Zoom capability | Yes |
Focal length range | 21.83 - 24 mm |
RS-232 ports | 1 |
Maximum analog resolution | 1920 x 1080 pixels |
Lamp type | AC HID |
Lamp power | 180 W |
Light source type | Lamp |
Service life of light source | 3500 h |
Service life of light source (economic mode) | 5000 h |
DVI port | No |
Serial interface type | RS-232 |
USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
Component video (YPbPr/YCbCr) in | 0 |
Supported video modes | 1080i, 480p, 576i, 576p, 720p |
Analog signal format system | NTSC 4.43, PAL, PAL L, PAL M, SECAM |
Supported graphics resolutions | 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1360 x 768 (WXGA), 1400 x 1050 (SXGA+), 1440 x 900 (WXGA+), 1600 x 1200 (UXGA), 800 x 600 (SVGA) |
RMS rated power | 7 W |
Placement | Ceiling |
Product type | Standard throw projector |
Product color | White |
Power source | AC |
AC input voltage | 100 - 240 V |
AC input frequency | 50 - 60 Hz |
Power consumption (max) | 233 W |
Power consumption (standby) | 4 W |
Power consumption (PowerSave) | 0.5 W |
Power consumption (economy mode) | 210 W |
Noise level | 34 dB |
Certification | CE; ErP; ÜV GS |
Noise level (economic mode) | 31 dB |
Storage temperature (T-T) | -20 - 50 °C |
Operating temperature (T-T) | 5 - 40 °C |
Cables included | AC, VGA |
Remote control type | IR |
Sustainability certificates | RoHS |
Depth | 247 mm |
---|---|
Width | 310 mm |
Height | 95 mm |
Weight | 2500 g |