NEC NP610S Faq

FAQ: Cleaning Smartboard Filters
12/10/2012
Rev 1
PURPOSE: The purpose of this procedure is to demonstrate clean and reset the filters for Smartboard
projector NEC NP610S.
OPERATING SYSTEM: Windows 7 is demonstrated in this procedure, but similar steps can be taken with
Windows XP and Vista.
PROCESS
STEP
REFERENCE IMAGE
STEP 1:
Locate
filter
location on
the rear of
the
projector.
Remove f
ilter by
pressing the tab
located on the top of
the filter frame.
STEP 2:
Locate
filter
location on
the side of
the
projector.
Remove f
ilter by
pressing the tab
located on the top of
the filter frame.

NEC NP610S Specifications

General

Brand	NEC
Model	NP610S
Category	Projector
Language	English