Do you have a question about the NEC NP43 and is the answer not in the manual?
Projection distance | 1.45 - 13.4 m |
---|---|
Vertical scan range | 50 - 100 Hz |
Horizontal scan range | 15 - 120 kHz |
Projection technology | DLP |
Contrast ratio (typical) | 1600:1 |
Projector native resolution | XGA (1024x768) |
Lamp power | 200 W |
Light source type | Lamp |
Service life of light source | 2500 h |
Service life of light source (economic mode) | 3500 h |
Focus | Manual |
Focal length range | 20.4 - 24.5 mm |
Analog signal format system | NTSC, NTSC 4.43, PAL, SECAM |
Serial interface type | RS-232 |
Dimensions (WxDxH) | 246 x 182 x 72 mm |
Power consumption (typical) | 266 W |
Noise level | 37 dB |
Weight | 1700 g |
---|
Covers safety, warnings, and precautions for projector use.
Details FCC compliance and potential radio frequency interference.
General safety instructions to ensure long life and prevent fire/shock.
Specific warnings regarding heat, ventilation, and electrical hazards.
Information on lamp life, replacement, and characteristics.
Guidance on projector placement and throw distance.
Details on connecting various video and audio sources.
Steps for connecting a DVD player via component output.
Steps for connecting a VCR via video and S-Video.
Step-by-step guide to powering on the projector.
How to choose between different connected devices.
Covers zoom, tilt, focus, and keystone correction.
Details on adjusting image size and automatic focusing.
Automatic correction of vertical distortion.
Procedures for manual focus adjustment.
Procedures for manual keystone adjustment.
Controlling audio levels and powering down the unit.
Adjusting brightness for lamp life and fan noise.
Setting a keyword to prevent unauthorized operation.
Basic operation for viewing images stored on USB.
Detailed procedure for lamp and pump replacement.
Lists common problems and their solutions.
Detailed troubleshooting for various issues.
A checklist to help diagnose issues before contacting support.