Do:
■ Turn off the product before cleaning.
■ Use a soft cloth moistened with mild detergent to clean the
display housing.
■ Disconnect the power plug from AC outlet if the product is not
being used for a long period of time.
■ If the mirror or lens is soiled, use a commercially available clean-
ing cloth for lens.
Do not:
■ Use abrasive cleaners, waxes or solvents to clean the unit.
■ Use under the following conditions:
- Extremely heat, cold or humidity.
- In areas susceptible to excessive dust and dirt.
- In direct sunlight.
- Move the projector by holding the cable cover.
- Hang from the projector in a ceiling or wall mounted instal-
lation.
- Apply excessively strong pressure against the mirror or lens.
- Keep nger prints off the mirror surface.
To Next Page
Loading...
