1. Turn on DHCP to allow the DHCP server to automatically assign
an IP, or manually enter the required network information.
2. Then choose apply and press button to complete the
conguration process.
3. Open your web browser and type in from the OSD LAN screen
then the web page will display as below:
4. Open “Projector Status and Control” to control your projector.
When making a direct connection from your computer to the
projector
Step 1: Find an IP Address (default:192.168.6.74) from LAN
function of projector.
192.168.6.74
How to use web browser to control your projector
When you used
the projector IP
address, you can
not link to your
service server.
To Next Page
Loading...
