NEC UNIVERGE DT920 Series - Page 70

FEATURE OPERATION
70
MEET-ME PAGING
Example:
Station A can page Station B. When Station B dials answer
code, they are connected.
To Page (Station A)
1. Dial “Paging” access code, receive a continuous
ringback for one second.
2. Page station B.
3. Remain off-hook or hang-up.
To Answer (Station B)
If Station A remains off-hook
1. Station B dials “Paging” answer code, and they
are immediately connected.
If Station A hangs up
1. Station B dial “Paging” answer code, and the dial
tone of Station A rings.
2. When Station A goes off-hook, they are
connected.
PAGING TRANSFER
Example:
Station A receives an important call for Station B who is not at a
desk. Station A can page Station B. When Station B dials the
Paging answer code, Station A can announce the call and
transfer it to Station B.
Station a Paging
1. Ask calling party to hold.
2. Press the Transfer key. Receive an interrupted
dial tone.
3. Dial “Paging” access code. Receive a continuous
ringback for one second.
4. Page Person B.
5. Remain off-hook or hang-up.
To Answer (Station B)
If Station A remained offhook
1. Station B dials “Paging” answer code, and is
connected with Station A. Station A announces
call.
2. Station A hangs up. Station B and the calling
party are connected.
If Station A hung up
1. Station B dials “Paging” answer code. The dial
tone of Station A rings.
2. Station A picks up and announces call.
3. Station A hangs up. Station B and the calling
party are connected.
– OR –
1. Station B dials “Paging” answer code, and is
immediately connected to the calling party.