TERMINAL SETUP
39
18.
The default file name will be displayed.
For the music on hold and ringer tone, the channel of voice
output is monaural.
- When downloading a file for music on hold, the default
file name is “MOH.wav”.
When changing the file name, go to 19.
When not changing the file name, go to 20.
19.
Press the BK soft key once to delete the default
file name and then enter a new file name by using
the digit keys.
■A maximum of 20 characters (“0-9”, “A-Z”, “a-z”, “*”, “#”,
“.”, “-” or “_”) can be entered as a file name.
■To delete an entered character, press the BK soft key.
20.
Press Enter key or the Exec soft key to start the
downloading process. While downloading a file,
the LCD displays “Downloading...” first and then
“Saving...”.
Be sure not to turn OFF the terminal while “Saving...” is
displayed on the LCD.
21.
After the downloading process is completed, the
display changes as follows:
The display goes back to the Download Files screen with
the Exit soft key.
When the downloading process ends in failure,
“Downloading Failed!” is displayed on the LCD. Check to see
the following table and then retry.
Download file is not placed in
the specified directory.
Place the download file in the
specified directory.
A different file name is specified
between the terminal and FTP/
TFTP/HTTPS server.
Set the same file name to both
the terminal and FTP/
TFTP/HTTPS server.
Incorrect IP address of
FTP/TFTP/HTTPS server has
been entered from the
telephone.
Set the proper IP address of
FTP/TFTP/HTTPS server.
The power to
FTP/TFTP/HTTPS server or
network equipment is OFF.
Reconnect the cable securely
LAN cable is disconnected.
Reconnect the cable securely.
To Next Page
Loading...
