NEC UNIVERGE DTK-12D-1 - Page 46

TERMINAL SETUP
46
Character Entry Method
As an example of character entry method, the
following shows how to enter “Ken Kobus”.
1. Press the [5] key twice to enter “K”.
2. Press the [＊] key to switch the text input mode
from uppercase to lowercase.
3. Enter “en” by using digit keys.
Press the [3] key twice to enter “e”.
Press the [6] key twice to enter “n“.
4. Press the [0] key once to enter a space.
5. Press the [＊] key twice to switch the text input
mode from lowercase to uppercase.
6. Press the [5] key twice to enter “K”.
7. Press the [＊] key twice to switch the text input
mode from uppercase to lowercase.
8. Enter “obus” by using digit keys.
Press the [6] key three times to enter “o”.
Press the [2] key twice to enter “b“.
Press the [8] key twice to enter “u”.
Press the [7] key four times to enter “s“.
9. Press the Enter key or the OK soft key.