TERMINAL SETUP 
38 
TO DOWNLOAD A FILE 
The user can download files for music on hold. When downloading 
these  files,  the  terminal  needs  to  be  connected  to  the 
FTP/TFTP/HTTPS server. 
 
■For details on the FTP/TFTP/HTTPS service, contact the 
system administrator. 
■For details on character entry method, see HOW TO 
INPUT CHARACTERS.   
 
Before starting the download, the IP Address/URI of the 
FTP/TFTP/HTTPS server must be entered from the terminal. 
 
1.
  Set up the FTP/TFTP/HTTPS server. 
 
<FTP server> 
Put the downloading file into the designated directory of 
the FTP server. 
 
<TFTP server> 
Put the downloading file into a desired directory of TFTP 
server  and  then  specify  it  as  the  directory  for 
downloading. 
 
<HTTPS server>   
Put  the  downloading  file  into  a  desired  directory  of 
HTTPS  server  and  specify  it  as  the  directory  for 
downloading. 
 
 
2.
  Press Menu key while terminal is in an idle state. 
 
3.
  Select 
□
2 Download. 
 
4.
  Select 
□
3 Protocol. 
 
5.
  Select a protocol used by the server which stores 
the download file, then the display goes back to 
the Download Menu screen. 
   
6.
  Select 
□
4 Account Settings. 
When 
□
1 FTP/
□
3 HTTPS is selected at 5, go to 7. 
When 
□
2 TFTP is selected at 5, go to 11. 
 
 
7.
  Select 
□
1 User ID. 
 
8.
  Enter a User ID by using digit keys, then press 
Enter key or the OK soft key. 
9.
  The display goes  back to the Account Settings 
screen. Select 
□
2 Password. 
 
10.
  Enter a password by using digit keys, then press 
the Enter key or the OK soft key. The display goes 
back to the Account Settings screen. 
 
11.
  Select 
□
3 Folder. 
 
12.
  Enter  the  directory  where  the  download  file  is 
stored and then press the Enter key or the OK soft 
key. 
 
13.
  The display goes  back to the  Account Settings 
screen. Press the Enter key or the Back soft key 
to display the Download Menu screen. 
 
14.
  Select 
□
2 Download Address. 
 
15.
  Enter the IP address/URI of the FTP/TFTP/ 
HTTPS server which stores the download file. 
For  example,  to  set  the  IP  address  of 
10.41.208.205, enter 10*41*208*205 [separate with 
an asterisk (*)]. 
 
After entering the IP address, press the Enter key or the 
OK soft key. 
 
16.
  The  display  goes  back  to  the  Download  Menu 
screen. Select 
□
1 Download Files. 
 
17.
  Select 
□
1 Hold Music.