NEC UX5000 User Manual

NEC UX5000 Multibutton Telephone
User Features
Phone: 303-773-1200 Email: kcg@kcgtel.com
www.kcgtel.com
GROUP LISTEN:
With call in progress on handset/headset
Press SPK key twice
Note: Call is heard through speakerphone
although conversation is continued through
handset. Caller cannot hear anything through
speaker.
TO CHANGE RING TONES:
Press call1 key
Dial 820
Press 2 for external ring tone
Dial code for the ring pattern (1-8)
Press SPK to hang up
TO PLACE A CONFERENCE CALL:
With call in progress
Press CONF key
--to dial an internal party
Press DSS key or dial extension
Wait for party to answer
Note: For internal party to be active on the call -
they must lift the handset.
--to dial another outside party
Dial 9 or press available line key
Dial number, wait for party to answer
Press CONF
Continue adding people via steps above OR
Press CONF again to bring together
Note: Max is 32 parties.
TO PROGRAM FUNCTION KEYS:
Press ↓
Press Prog using soft key
Press ↓↓
Press Fctn
Press Function Key to program
Dial code for corresponding function (see below)
Press HOLD
01 and ext = DSS (Direct Station Select)
01 and 9+phone number = speed dial
05 = Headset key
48 = Voice Over
77 and ext = Voicemail Box key
78 = Record
40 = Handset Mute
TO CLEAR FUNCTION KEYS:
Press ↓
Press Prog using soft key
Press ↓↓
Press Fctn
Press Function Key to Clear
Dial 00
Press SPK
VOICEOVER:
Dial busy ext or press busy dss key
Press Voiceover key
Converse
Note: Voiceover is used when you need to get
through to someone already on another call. This
produces a muted second voice during their call.
TO ANSWER VOICEOVER:
Press and continually hold voiceover key
Converse with Voiceover party
Release button to return to initial call

NEC UX5000 Specifications

General

Brand	NEC
Model	UX5000
Category	Telephone
Language	English