NEC Video Wall Mount PD02VW MFS 46 55 P User Manual

1 of 11
ISSUED: 02-19-13 SHEET #: 145-9018-1
Installation and Assembly:
Full Service Video Wall Mount
Model: PD02VW MFS 46 55 P
Designed for NEC MultiSync® 46” and 55” XUN/V, XS and P Series
Manufactured by Peerless-AV
Max UL Load Capacity:
125 lb (57 kg)

NEC Video Wall Mount PD02VW MFS 46 55 P Specifications

General

Product Type	Video Wall Mount
Compatible Screen Size	46"-55"
Brand	NEC
Model	PD02VW MFS 46 55 P
Category	Racks & Stands
Compatibility	NEC displays

Summary

Parts List

Installation to Wall Stud

Installation to Solid Concrete or Cinder Block

Attaching Adapter Brackets

Attaching Adapter Brackets to Display

Connect adapter brackets to the display using socket pin screws and washers.

Attaching Adapter Brackets to Display Carriage

Attach adapter brackets to the display carriage and secure with a security screw.

Mount Assembly Adjustments

Pull Out Mount Assembly Adjustment

Adjust the display position using knobs for fine-tuning height and tilt.

Adapter Bracket Adjustment

Adjust adapter brackets to move display corners towards or away from the wall.

Operations and Security

Cable Management

Route display cables through mount assembly using mesh sleeve and cable ties.

Open and Close Pull Out Mount Assembly

Extend the mount by releasing the locking tab for service access.

Adapter Bracket Operations

Open and close adapter brackets by pulling release straps.

Pull-Out Mount Assembly Security

Secure the mount using screws to prevent locking tabs from releasing.