55
* Buttonholes are sewn from the front of the presser foot to the back, as shown.
011 012 014
0 010 013
015 016 017 019
018 020 021
018 020 021
v
Making a buttonhole on stretch
fabrics
018: For light to medium weight woven fabrics.
020: For stretch or woven fabric
021: For stretch fabric
When sewing buttonholes on stretch fabric,
hook heavy thread or cord under the
buttonhole foot.
Attach the electronic buttonhole foot and plug
the cord into the socket above the presser
foot bar. Bring the gimp thread ends to the
front of the foot and insert them into the
grooves, then tie them there temporarily.
Lower the presser foot lifter and start sewing.
Set the stitch width to match the diameter of
the gimp thread.
Once sewing is completed, pull the gimp
thread gently to remove any slack. Cross the
gimp in front of the needle and thread gimp
ends into a large needle, pull to the wrong
side and knot ends before cutting excess.
①
Wrong side
Note
It is suggested that you sew with a
stabiliser material under the fabric.
1
To Next Page
Loading...
