4. Kick Starting
Grip the brake lever, tread the starting pedal
heavily and then the engine will be started.
□Running in
To keep your motorcycle running in a good condition,
please follow the below rules during the running-in
period.
Warning
◆ 5 seconds is the maximum limit for each starting
and10 seconds is the minimum interval.
◆ Stop pressing the starting button immediately
after the engine starts.
◆ Do not press the starting button while the engine
is running, or the start motor will be damaged.
◆ When using electric starting, please press the
rear brake lever in advance to get through the
circuit and start the motor.
◆ When using electric starting, don‟t operate the
starting motor continually, or it may cause
damage to the starting motor and the battery.
◆ Warm up the engine after cold starting (about 3
minutes).
◆ After the engine started, the starting pedal
should be taken back to its original position.
Otherwise, it will affect the driver‟s safety.
◆ Please don‟t start the engine in unventilated
places, because the wasted gas with CO is
harmful to human being.
To Next Page
Loading...