EasyManua.ls Logo

Neco F2 50 - Page 14

Default Icon
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1. Battery
12V/5.7Ah battery
When the voltage is less than 11.5V, please use
kick starting in stead of electric starting.
Put the ignition switch on OFF position
before battery replacement.
Electrode identification: “+”— red line, “-”—green line.
Change a new battery every 4 years.
2. Carburetor and idling speed adjustment
Keep the engine warmed up for 2-3 minutes.
Adjust the idling speed screw to set the engine at
speed of 1700 ± 100 rpm. The idling speed
adjusting screw is following:
3. Air cleaner
A: Remove motorcycle body covering parts.
Remove 7 tightening screws of air filter cover.
Remove air filter cover.
B: Take out the sponge core.
CLEANING:
Pour the non-inflammable detergent into a basin
and immerse the sponge core into the detergent.
Warning
It has been fully adjusted to the highest
position when manufactured.
screw
1 2 3 4