6
1. Dispensing compartment fastening knob
2. Cup chute fastening knob
3. Cup chute locking clip
4. Dispensing compartment
1
2
3
4
12.
Remove the dispensing compartment
from the back of the machine by
unscrewing both fastening knobs
and uncliping the cup chute. Clean it
but pay special attention to the cup
sensor area and the LED lights. Air
dry completely.
Weekly Cleaning Steps
Weekly cleaning steps are done.
CHECKLIST
• Brew group cover
• Drip panel
• Drip tray
• Dispensing
compartment
IMPORTANT
Rinse and air dry parts
prior to reinstall in the
brewer.
After at least 30 minutes, remove all soaked
parts from the bucket. Rinse and air dry
completely.
IMPORTANT
Rinse and air dry parts prior to reinstall
in the brewer.
13.
Reinstall every part back in the brewer in the reverse order
of removal.
14.
To Next Page
Loading...