10
Note:
Continue using the unit for 2
weeks, the lights up to
alert you have to clean the
collection array.
Press the button for 3sec
to acknowledge the cleaning
alert. The cleaning indicator
button will be turn off. Power
Off the unit and take out
collection array to clean.
If the collection array is too
dirty, the unit shut down
automatically and flashes all
indicators for a warning.
Not operating, no light indication
- Ensure the collection array is connected with the fan
body firmly.
- Ensure the AC adaptor is fully inserted into the AC outlet
and its plug is connected to the DC jack of the air
purifier.
- Press the Power button momentarily to observe that it
lights up.
Not operating, indicator flashing
- Check the collection array, for too heavy dirt or any
clogging by hairs or fibers.
- Clean the collection array as needed and install back in
the air purifier.
To Next Page
Loading...
