Nectar Pacer - Programming Preset A2

Using a Nectar Pacer MIDI Foot Controller with a Korg Pa2X
14
Programming Preset A2
Switch Function Program Change LED Color
1 INTRO 1 80 Orange
2 INTRO 2 81 Orange
3 FILL 1 87 Green
4 FILL 2 88 Green
5 FILL 3 89 Green
6 ENDING 1 90 Red
A STS 1 64 Blue
B STS 2 65 Blue
C STS 3 66 Blue
D S 4 67 Blue
Note that Preset A2 is almost identical to Preset A1.
To save time, first copy Preset A1 to A2.
First Select Preset A1  This is your Source
The Display should read:
PRESET
A1
Turn the Dial  PRESET, CONTROL, SAVE, GLOBAL, EXTERNAL CONTROLLER, DUMP, BOOT.
Select SAVE
Push Down.
STORE
Push Down one more time
Rotate the Dial to select A2
Push Down to confirm. Preset A1 is now copied to Preset A2