Number Component Description
6 Renos unit
The Renos unit is the main processing unit of an FLR product. It takes care of powering the system, data
communication between units and with the outside world. For most products it is equipped with an RF
detection engine - with the exception of the RFID-only systems used in Region 1 to be compatible with the
OST platform.
7 Buzzer The buzzer can be used for user feedback or alarms.
8
50 ohm
PCB
The 50 ohm PCB takes care of the connection between the Renos unit, the RF antenna and the lights.
To Next Page
Loading...
Need help?
General
