VP1101-200PM-00 ISO Reader Solid (CAN) Manual version 1.0 / Page 3
Appendix A: Specifications
Specifications VP 1101
Dimensions 2850 x 1700 x 45 mm LxWxH
CAN CAN-bus communication 125 kBit
Power Input voltage 25 VDC, +20% -20%
Power consumption 200 mA with antenna switched on
Protected against reverse connection power supply
Software Downloadable by the CAN network
Antennas Internal fixed antenna
Detection distance Depending on used tags
Synchronization Synchronization according to ISO 11785, ISO 24631-7
Environment Temperature: Operating: -10 – 50 °C, Storage: -25 – 70 °C
Relative humidity: 10 – 93% non condensing
IP class IP 65.
Always use a NEDAP power supply.
The Nedap guarantee-regulations are only valid when is installed as indicated in this manual.
Install data cables at a safe distance from (high) powered cables
More information
For more detailed information contact your local Nedap supplier or check the internet site.
To Next Page
Loading...