nedis AAMP2411BK - Page 5

5
Safety instructions
-
WARNING
• Ensure you have fully read and understood the instructions in
this document before you install or use the product. Keep the
packaging and this document for future reference.
• Only use the product as described in this document.
• Do not use the product if a part is damaged or defective.
Replace a damaged or defective product immediately.
• Do not drop the product and avoid bumping.
• This product may only be serviced by a qualied technician
for maintenance to reduce the risk of electric shock.
• Do not expose the product to water or moisture.
Using the ground wheel
• Check if your turntable got a built-in amplier.
If you have got a built-in amplier, you do not have to use the
ground wheel A
5
, but if you want to use the pre-amplier,
switch o your built-in amplier.
Follow these steps to connect earth to ground:
-
Do not use any tools.
1. Turn A
5
counter clockwise.
2. Insert a ground cable (not included) from your turntable into
A
5
.
3. Turn A
5
clockwise to x A
5
back in place.
Connecting the product
4
Make sure all the devices are switched o before
connecting the product.
1. Plug a turntable into the RCA input A
3
using a twin RCA
cable (not included).
2. Plug the speakers into the RCA output A
4
using a twin RCA
cable (not included).
3. Plug the power adapter A
7
into the power input A
6
.
4. Plug the power adapter into a power outlet.
Using the product
• Use the power switch A
2
to switch the product on or o.
The power indicator LED A
1
lights up.