7
• Keep cells and batteries clean and dry.
• Do not short-circuit a cell or battery.
• Do not store cells or batteries haphazardly in a box or drawer where they may
short-circuit each other or be short-circuited by conductive materials.
• Always keep the product and the microSD card away from strong magnetic
interference.
• Always store the product in a cool, dry and dust free place.
• Always unplug the product in case of overheating.
Insert or change memory card (image B)
A microSD card (not included) is required to store pictures or videos. Insert the
microSD card into the microSD card slot A
r
.
4
Use a microSD memory card with at least a class 10 speed rating and a
maximum storage capacity of 128GB.
4
Format the microSD card before use.
-
Formatting the microSD card will remove all les from the microSD card.
Make sure to back up all les you want to keep before formatting the
microSD card.
Charging the battery (image C)
4
The product is delivered with a partially charged battery. For optimal battery
life, fully charge the battery before using the product for the rst time.
Charge the camera from any USB outlet with the supplied USB-C cable A
p
. The
camera can be charged while recording video. Fully charging the battery takes
about 3 hours.
4
The charging indicator LED A
6
lights up red to indicate the product is
charging.
Attaching the product to the accessories
Insert the product into the waterproof housing A
u
.
-
Make sure the waterproof housing is completely closed and the gasket is
in place.
4
The product is not waterproof without the waterproof housing.
The waterproof housing A
u
can be tted with the supplied mounting
accessories to your clothing, action gear, helmet, etc.
4
Make sure the attachment is secure.
4
Make sure the camera does not impede your movement, view, or operation
of your action gear.
To Next Page
Loading...
