nedis AIPU100CWT - Page 5

5
• Do not insert any objects into the product.
• Do not place items on top of it.
• If servicing is needed, refer to qualied personnel.
• Do not let the power cable touch hot surfaces.
• Do not use the power cable to carry the device.
• Do not unplug the product by pulling on the cable. Always grasp the plug
and pull.
Removing the packaging
1. Open A
7
.
2. Take out A
6
.
3. Remove the packaging and reïnstall A
6
.
4. Close A
7
.
4
Do not place the product within 40 cm of the wall to ensure proper
operation.
5. Plug A
4
in a power outlet.
Using the product
1. Press B
1
to switch on the product.
2. Press B
4
to increase / decrease the fan speed.
4
B
3
indicates the selected fan speed.
3. Optionally, choose one of the following:
• B
2
to select ‘sleep’.
• B
6
to select ‘anion’.
4
Keep the windows closed while the product is switched on.
Set sleep mode
1. Press B
2
to select sleep mode.
4
In sleep mode, the product operates as quiet as possible.
2. Press B
2
or B
1
to exit this mode.
Set anion mode
1. Press B
6
to select anion mode.
4
The product releases millions of anions per second.
2. Press B
6
or B
1
to exit this mode.