6
Troubleshooting
Problem Solution
The product does not
switch on.
Connect to a power outlet.
Check if the power cord is damaged.
Make sure A
7 is closed.
The product is making
strange noises.
Make sure A
6 is placed in the correct way.
Press B
4 to increase the speed
Replace A
6.
Poor purication quality. Do not block ventilation openings and make sure
that there is enough space around the product.
Make sure A
6 is placed in the right way.
Make sure the room is smaller than 20 m
2
.
Replace A
6.
The product spreads an
unpleasant odour.
Make sure the room has a relative humidity
below 85 %.
Replace A
6.
B
8 illuminates after
replacing A
6.
Press and hold B
8 for 3 seconds to reset.
Specications
Product Air purier
Article number AIPU100CWT
Dimensions (l x w x h) 215 Ø x 460 mm
Applicable area < 20 m
2
Clean air delivery rate 200 m
3
/ h
Noise level 32 - 50 dB
Operating temperature -10 °C - 40 °C
Operating humidity < 95 % RH
Power supply 220 - 240 VAC ~ 50 / 60 Hz
Rated power 35 - 40 W
Standby power < 0.5 W
To Next Page
Loading...
