nedis AIPU200CWT - Page 5

5
• Do not connect a bound cable to the power outlet.
• Only use the product indoors.
• Do not use the product in wet or damp environments.
• Do not place the product near gas, an electric burner or a heated oven.
• Do not cover ventilation openings.
• Do not insert any objects into the product.
• Do not place items on top of it.
• If servicing is needed, refer to qualied personnel.
• Do not let the power cable touch hot surfaces.
• Do not use the power cable to carry the device.
• Do not unplug the product by pulling on the cable. Always grasp the plug
and pull.
Removing the packaging
1. Open A
4
.
2. Take out A
3
.
3. Remove the packaging and reïnstall A
3
.
4
Facing as shown in image A
4. Close A
4
.
4
Do not place the product within 40 cm of the wall to ensure proper
operation.
5. Plug A
5
in a power outlet.
Using the product
1. Press B
y
to switch on the product.
2. Press B
t
to increase / decrease the fan speed.
4
B
2
indicates the selected fan speed.
3. Optionally, choose one of the following:
• B
r
to select ‘sleep’.
• B
e
to select ‘auto’.
• B
w
to select ‘anion’.
• B
q
to select ‘AQ’.
4
Keep the windows closed while the product is switched on.
Set auto mode
1. Press B
t
to select auto mode.
4
B
2
shows the selected mode.