6
The sensor indicates the air quality and adjust the speed of the fan if necessary.
2. Press B
q
or B
y
to exit this mode.
Set sleep mode
1. Press B
r
to select sleep mode.
4
In sleep mode, the product operates as quiet as possible.
2. Press B
r
or B
y
to exit this mode.
Set timer
1. Press B
e
to set the timer.
2. Press B
e
to increase / decrease the time.
4
B
5
shows the selected time.
Time options: 2 hours, 4 hours, 8 hours.
3. To cancel the timer, restart the product.
Set anion mode
1. Press B
w
to select anion mode.
4
The product releases millions of anions per second.
2. Press B
w
or B
y
to exit this mode.
Set Air Quality mode
1. Press B
q
to select Air Quality mode.
A1 shows the air quality using colours.
Colour Air quality
Red Bad
Yellow Fair
Blue Good
Troubleshooting
Problem Solution
The product does
not switch on.
Connect to a power outlet.
Check if the power cord is damaged.
Make sure A
4 is closed.
To Next Page
Loading...
