6
4. Close A
9
.
4
A
8
magnetically locks A
9
.
4
When A
8
is not connected properly, the product does not work.
5. Do not place the product within 40 cm of the wall to ensure proper
operation.
6. Plug A
w
in a power outlet.
4
The product automatically shuts o when A
9
is removed.
Using the product
1. Press B
1
to switch on the product.
2. Press B
8
to increase / decrease the fan speed.
4
B
9
indicates the selected fan speed.
4
For optimal functioning run the product for 15 – 20 minutes at maximum
speed.
3. Optionally, choose one of the following:
• B
2
to select ‘timer’.
• B
4
to select ‘auto’.
• B
7
to select ‘sleep’.
4
Keep the windows closed while the product is switched on.
Air quality indicator
Colour Air quality
Red Bad
Yellow Moderate
Green Good
Blue Very good
A
2 shows the air quality using colours.
After 30 seconds, A
2 changes colour based on the current air quality.
Change the brightness of A
2 by pressing A2 using the palm of your hand.
Set timer
1. Press B
3
to set the timer.
2. Press B
3
to increase / decrease the time.
4
B
2
shows the selected time.
Time options: 2 hours, 4 hours, 8 hours.
3. To cancel the timer, restart the product.
To Next Page
Loading...
