nedis AIPU300CWT - Page 7

7
Set auto mode
1. Press B
4
to select auto mode.
The sensor indicates the air quality and adjust the speed of the fan if necessary.
2. Press B
7
or B
8
to exit this mode.
Set sleep mode
1. Press B
7
to select sleep mode.
4
In sleep mode, the product operates as quiet as possible.
2. Press B
4
or B
8
to exit this mode.
Memory function
• The product remembers the latest settings when switched o.
• The product resumes with these settings when switched back on.
Troubleshooting
Problem Solution
The product does not switch on. Connect to a power outlet.
Check if the power cord is damaged.
Make sure A
8 is closed.
The product is making strange noises.
Make sure A
q is placed in the
correct way.
The air purier may be damaged, or
a foreign object may be inside. Stop
using the air purier and contact your
Nedis dealer.
Replace A
q.
Poor purication quality. Do not block ventilation openings
and make sure that there is enough
space around the product.
Make sure A
q is placed in the
right way.
Make sure the room is smaller than
45 m
2
.
Replace A
q.