nedis DCAM06BK - Page 8

8
4
Always focus your attention on the road.
Connecting the product to a power source
Option 1:
1. Plug the auxiliary power plug A
8
into an auxiliary power outlet.
2. Plug the other end of A
8
into the mini USB port A
e
.
Option 2:
• Charge the product using the USB port A
e
.
4
The product automatically switches on and starts recording when you switch
on your car engine.
Using the product
1. Press power button A
i
for 3 seconds to switch the product on or off.
4
When switching off the product automatically saves the recordings.
2. Press A
4
twice to enter the setup menu.
3. Press up A
3
or down A
5
to navigate through the menu.
4. Press OK A
9
to confirm a selection.
5. Press A
4
to go back one step.
Menu
1. Press Menu A
4
to enter the menu.
2. Press up A
3
or down A
5
to navigate through the menu.
3. Press OK A
9
to confirm a selection.
Press the mode button Aq to toggle between video mode, photo mode and
playback mode.
Video mode
1. Press A
q
to select video mode.
2. Press A
9
to confirm your selection.
3. Press A
4
to access or exit menu mode.
4. Press A
9
to start or stop recording.
Press A3 to switch the microphone on or off.
Emergency lock
In video mode, press the lock button Aw to save the recording as a read-only
file.
This recording cannot be overwritten or deleted when not connected to a
computer.