nedis DVB-T2 - Connect the Product; Set up; Password

9
The product incorporates double insulation between
hazardous mains voltage and user accessible parts. When
servicing, use only identical replacement parts.
Also refer to the information on the bottom of the enclosure for
electrical and safety information before installing or operating the
product..
Connect the product [see image D]
- CAUTION
• Make sure that the voltage of your mains wall outlet matches the
voltage required by the adapter.
• Disconnect all devices from mains before making any
connections.
• Connect power of all your devices last.
Set up
• Turn on the product by pressing A
4
/C
1
.
• Make sure your TV is switched to the right input channel.
The rst time you switch on the set top box, the Main Menu will
appear.
1. Follow the instructions on screen to change the Language and
Country/Region and conrm with C
8
.
2. Choose the video settings and conrm.
3. Choose which channels to scan for.
• FTA stands for Free To Air.
• If you choose No, all channels will be scanned.
4. After conrming, a list of available channels is made.
You are now ready to watch TV.
4
All settings you make can be edited by going to the menu with
C
6
.
4
Navigate through the menu with C
79sd
.
Password
• For some settings a password is required.
• The default password is 0000.