4
a
Quick start guide
HDMI™ Repeater
VREP3480AT
For more information see the extended manual online:
ned.is/vrep3480at
Intended use
This product VREP3480AT is exclusively intended to transfer a HDMI
signal between two HDMI cables through an Ethernet cable.
The product is intended for indoor use only.
This product is not intended for professional use.
Any modication of the product may have consequences for safety,
warranty and proper functioning.
Specications
Product HDMI™ Repeater
Article number VREP3480AT
Dimensions (l x w x h) 110 x 75 x 25 mm
Power supply 12 VDC ; 2 A
Connectors on sender
Input HDMI Type A connector
Output Ethernet (CAT 6, CAT 6a, CAT 7)
HDMI Type A connector
Infrared support 20000 - 60000 Hz
Connectors on receiver
Input Ethernet (CAT 6, CAT 6a, CAT 7)
Output Ethernet (CAT 6, CAT 6a, CAT 7)
HDMI Type A connector
Infrared support 20000 - 60000 Hz
Max. supported video format 4K @ 60 Hz up to 60 m
Other supported video
formats
480i / 480p / 576i / 576p / 720p
/ 1080i / 1080p / 2K @ 60 Hz /
4K @ 30 Hz / 4K @ 60 Hz
Supported audio format LPCM ; DTS Digital, Dolby
Digital (incl. DTS-HD and Dolby
True HD)
HDMI Compliance HDMI 2.0
HDCP Compliance HDCP 1.4 / 2.2
Max. transfer rate 18 Gb/s
Operating environment
Operating temperature 0 °C - 40 °C
Operating humidity 5 - 90% (no condensation)
Main parts (image A)
1 Sender
2 Receiver
3 Power supply
4 Infrared transmitter
5 Infrared receiver
Safety instructions
-
WARNING
• Ensure you have fully read and understood the instructions in
this document before you install or use the product. Keep the
packaging and this document for future reference.
• Only use the product as described in this document.
• Only use the provided power supply.
• Do not use the product if a part is damaged or defective.
Replace a damaged or defective product immediately.
• Do not drop the product and avoid bumping.
• This product may only be serviced by a qualied technician for
maintenance to reduce the risk of electric shock.
• Do not expose the product to water or moisture.
• Do not plug or unplug the charger with wet hands.
• Do not unplug the power supply by pulling on the cable. Always
grasp the plug and pull.
• Keep the product and power cable out of reach of children
under 8 years of age.
Connection diagram (image B)
1. See image B for a connection overview.
Declaration of Conformity
We, NEDIS, as manufacturer, declare that product VREP3480AT from
the brand Nedis, produced in China was tested according to all
relevant CE standards / regulations and passed all tests.
The complete Declaration of Conformity ( + safety datasheet if
applicable ) can be found and downloaded via http://webshop.
nedis.com
For other compliant-related information, please contact customer
service desk for support:
via website: http://www.nedis.com
via e-mail: service@nedis.com
NEDIS B.V., De Tweeling 28,
5215 MC ’s-Hertogenbosch, THE NETHERLANDS
c
Kurzanleitung
HDMI™-Repeater
VREP3480AT
Weitere Informationen nden Sie in der erweiterten
Anleitung online: ned.is/vrep3480at
Bestimmungsgemäße Verwendung
Dieses Produkt VREP3480AT ist ausschliesslich zur Übertragung
eines HDMI-Signals zwischen zwei HDMI-Kabeln über ein
Ethernetkabel bestimmt.
Das Produkt ist nur zur Verwendung innerhalb von Gebäuden
gedacht.
Dieses Produkt ist nicht für den professionellen Einsatz gedacht.
Jegliche Modikation des Produkts kann Folgen für die Sicherheit,
Garantie und ordnungsgemäße Funktionalität haben.