11
• Keep cells and batteries clean and dry.
• Retain the original product literature for future reference.
• Battery usage by children should be supervised.
• Dispose of the cell or battery properly.
• Seek medical advice immediately if a cell or a battery has been swallowed.
Installing the battery
1. Turn the alarm A
1
counter clockwise to remove it from the bracket A
5
.
2. Insert the battery A
6
into the battery compartment A
4
. Make sure that
the battery polarity (+/-) matches the polarity markings inside the battery
compartment.
3. Turn the alarm A
1
clockwise to attach it to the bracket A
5
.
4. Test the product.
-
Constant exposure to high or low humidity may reduce battery life.
Choosing a location (image B)
For the highest safety, it is recommended to install the product in areas with a
source of combustion where smoke can be detected as quickly as possible.
The product should be installed in:
• Every sleeping area.
• Both ends of a hallway longer than 12 m.
• Every room where a furnace, a heat source and/or other burning devices are
located.
• Every room where multiple people spend several consecutive hours.
• Install at least one product on each oor of a multi-level home.
In areas with a source of combustion:
• On the ceiling, at least 50 cm away from surrounding walls.
• At a central point in the room.
• Not in turbulent air (near windows, ceiling fans or air conditioners).
To Next Page
Loading...
